Language

Product
Product
51.2V200AH 10240kwh Rack Type Lithium Battery with protection design
  • 51.2V200AH 10240kwh Rack Type Lithium Battery with protection design

51.2V200AH 10240kwh Rack Type Lithium Battery with protection design

FEATURES
Long Cycle Life: The service life of LiFePO4 battery is nearly 10 times that of lead-acid battery,with much higher comprehensive use value.
Modular design: The rack type battery with Standard 19 inch cabinet design. 
High Power: Multiple batteries in series or in parallel are available to achieve higher capacity, charging and discharging current. Max. 8 in parallel are supported. 
4 protection design: cell protection, BMS protection, air switch protection, grounding protection. 
APPLICATION
*Solar/Wind energy storage system
*Telecommunication
*Residential/Hospital/School/Factory standby power
*Electric power systems

    SPECIFICATIONS

    Electrical Specifications

    Nominal Voltage

    51.2V

    Nominal Capacity

    200Ah (C5,25℃)

    Energy

    10240kwh

    Use Period

    >10 Years (C5,25)

    Cycle Life

    >6000 times (25, 0.2C/0.2C 70% DOD)

    Efficiency of Charge

    100% (25 0.2C)

    Efficiency of Disharge

    96~99% (25 1C)

    Number of Expandable batteries

    8pcs

    Charge Specifications

    Recommended Charging Current

    40A

    Max Charging Current

    150A

    Charge voltage

    58.4V

    Discharge Specifications

    Recommended Discharging Current

    40A

    Max Disharging Current

    150A

    Discharge Cut-off Voltage

    40V

    Temperature Specifications

    Charge Temperature

    0~40

    Discharge Temperature

    -20~60

    Recommended Operating Temperature

    25℃

    Mechanical Specifications

    Install method

    Racked

    Shell material

    Steel

    Dimensions ( mm. )

    483*580*266mm

    Weight (kg)

    87kgs

    IP Grade

    IP21

    Communication

    RS485/RS232/CAN


    TYPICAL LITHIUM IRON PHOSPHATE CHARACTERISTICS



    WARNING TIPS!!!

    * Do NOT short circuit, crush or disassemble
    * Do NOT heat or incinerate.
    * Do NOT immerse in any liquid.
    * Do NOT allow the battery to become over discharged. If possible, isolate the battery when not in use.
    * Do NOT leave the battery in a discharged state. Always recharge after use with LiFePO4 battery charger. 
    * Store at 50% capacity. Recharge every 3-6 months. The storage area should be clean, cool, dry and ventilated.
    * Please read instruction manual before installation.


    Please submit your basic information, we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Add: RM14-1413, Block 4, Bangkai Technology Park, No. 9 Guangyuan 5th Road, Guangming District, Shenzhen

©2023 Shenzhen Gitenno Technology Co., Ltd. All rights reserved   Web Design—Tiandixin